Article details
Operation:Electro-mechanical lockFail locked, i.e. locks when no powerLocking bolt is floating to compensate for any tolerancesTechnical data:Power supply: 12 V DC (Direct Current)Continuous current consumption: 50 mATensile load: >200 N (acc. to DIN 68 852)Monitored version:Contract rating, 5V 10mA maximum
Article variantElectromagnetic locking actionconnection cable with AMP pluglocking bolt is held floating for 2D tolerance compensation
Product typeFurniture Lock Case
Area of application
For use in furniture and office equipment, such as roller shutters, flaps, hinged doors and drawers
Version
Unmonitored
Material
Lock case: Zinc alloy, locking bolt: Plastic, fixing plate: Zinc
Functionality
The lock remains unlocked for 3 seconds via the FT 120/FT 200 (standard), then the door is locked again.If no voltage is present, the furniture lock is locked.
Connection
FT 120 furniture terminal: Connection via CC 140 multi-lock adapter, FT 200 furniture terminal: Connection via MLA 8 multi-lock adapter
Order reference
The following components are required (please order separately):Power supplyReaderKey cards or tagsController (furniture, door or wall terminal depending on application)Locking bolt, release or plateAccessories such as mains leads, cables, multi-lock adapters, distributors, relay units, drilling templates and fixingsFor help, advice and ordering of our full range of Dialock access control systems please get in touch with our Project team, 0800 171 2907 or estimating@hafele.co.uk
Supplied with
1x Lock case, nickel plated zinc alloy1x Fixing plate, nickel plated zinc alloy1x Locking bolt, grey plastic1x AMP plug connector1x Connecting cable, 1 or 5 m lengths
Additional information attributes
A furniture handle (hole centres 32 mm) can be screwed to the backside of the fixing plate.The FLC lock cases (keyed alike) are switched parallel when using one DFT furniture terminal and several FLC lock cases. Several FLC lock cases (keyed different) can be switched individually via the OE electronic output extender.The drilling jig must be used for installing the FLC lock case.Installation film on CD under Cat. No. 732.29.491. This film shows DFT and FLC installation, start-up and reset.