Article details
Quick code change facility, no need to remove lock from the doorFor use with internal or external doorsLever handle lock for doors hung on the left or rightCode chamber requires that the lever is rotated 45° to re-set the lock for the next user codeKey overrideVersions:For use with existing mortice latch or lockFor use with existing mortice latch or lock with either a fixing hole 22 mm below the spindle follower or two horizontal holes either side of the spindle follower (38 mm centres)When using the front and back plates only, please test your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock cases have a highly sprung latch follower which can defeat the clutch on this lockWith tubular mortice latch includedTested to grade 2 ANSI A156/2 and UL/UCL. Fire rating 3 hours (when fitted with fire kit)
Equipped with
Door operation insideLever operated
Access control insideFree accessibility
Door operation outsideLever operated
Access control outsideCorrect code (standard), Key (key control)
Colour/finishbrushed
For door type
Interior door, Exterior doors
For number of doors
1-leaf doors
Suitable for
Existing mortice latch or lock
Features
No power supply, no batteries and no wiring required, In order to reset the lock for the next code entry, the lever must be rotated by 45°, Latchbolt, reversible
Material
Steel
Outside backplate height
184 mm
Outside backplate width
58 mm
Outside lock depth
75 mm
Inside backplate height
184 mm
Inside backplate width
58 mm
Inside lock depth
88 mm
Supplied with
For use with existing mortice latch or lock version: 1x mechanical front access device, 1x 2 part 8mm spring loaded spindle,1x rear access device, 2x keys for code changeWith tubular mortice latch version: 1x mechanical front access device, 1x rear access device, 1x tubular mortice latch, 1x strike plate, 3x spindles, 2x keys