Article details
To insert the shelf support, drill out the board as shown in the drawing right Level the shelf by laying on the shelf supports and adjusting the eccentric screw before finally fixing the shelf in positionAdjustable in height and inclination:Size 12 mm: ±1 mmSize 14 mm: ±2 mm
Installation:- Drill lateral hole for accommodating support bolt with elongated hole drilling machine or chain cutter.- Take eccentric adjusting range into consideration when milling recess for screw-on plate.
Colour/finishzinc plated
VersionWith screw-on plate and wall plug fixing
Area of application
For installation into masonry walls
Material
Steel
Installation
For screw fixing to support elementFor mounting in drilled hole in shelf
Installation reference
Mill out the lateral hole for holding the support bolt with an elongated hole drilling machine or chain mortiser.Take the eccentric adjusting range into consideration when milling out the holder for the screw-on plate.
Order reference
Ø 5.0 mm Hospa screws required, order separately
Supplied with
1 Supporting pin with mounting plate2 Pre-mounted eccentric sleeves1 S8 R80 Fisher wall plug
Technical data attributes
Configuration required
Additional information attributes
max. distance between two shelf supports: 700 mm