Article details
0.9 mm thick Grade 304 stainless steel wrapped onto 9.0 mm thick MRMDF core (Moisture resistant MDF), brushed stainless steel finish, brushed effect runs vertically. All edges are folded and unwelded2 year warranty
Thickness10 mm
Splashback version
Splashback
Material
Stainless steel
Order reference
Use adhesive to mount to the wall: Order assembly adhesive, 310 ml tube, 003.50.100 separatelyE-cloths for polishing stainless steel are also available to order
Additional information attributes
Installation and modification advice:Leave on the protective filmAdd masking tape to the area to be cutDraw out the cutting lineDrill a hole to fit jigsaw blade to cut roundA drop of oil may may be needed on the bladeStorage: We recommend that the plastic coating protecting the stainless steel must be left intact until installation is completedCleaning and care:Chlorides such as bleach or common salt and acids of any kind can damage all grades of stainless steel surfaces. If a spillage occurs rinse immediately and thoroughly with plenty of fresh water and then dry with a soft clothMetal objects that may rust should never be left in contact with stainless steelCare should be taken when handling and installing these products. For your safety, we recommend that hands are protected from unfinished edges and corners