Article details
28 mm and 40 mm worktop thicknessesHardwood worktops are constructed from finger jointed pieces of kiln dried timber within a width range of 38-41 mmRaw sanded to 120 grit and ready for finishingFabricated hardwood worktops have a silky smooth finish and are virtually maintenance freeThe quality is A (top side) / B (underside)The colour of the wood will change over time, giving a beautiful and matured lookAll tops are individually stretch-wrapped. A full pallet consists of a quantity of 20 tops. Boards are available individually, no minimum quantity appliesStore in racks with maximum 500 mm gaps. Store in humidity between 40% and 55% and in normal room temperature of 18°C and 23°C10 Year limited manufacturer’s warrantyPrices include delivery to a UK mainland trade address
Splashback version
Upstand
Material
Wood
Tolerance
Timber can expand as much as 1 mm/mtr. Always allow a gap of at least 3 mm if for example, worktops are captive between wallsTolerance is ±2 mmUpstands should be fixed to the wall and NOT to the worktopAllow a 3 mm gap between the work surface and upstand, the only connection between upstand and worktops should be silicone sealant, allowing the natural movement of your worktopAllow a minimum 50 mm from the cut-out to the front edgeWherever possible, joints in worktops should fall on a carcass end panel, giving added support to a jointJoints should be a minimum of 100 mm from the sink or 120 mm from a hob cut-outAllow a minimum of 120 mm between heated cut-outsStainless steel sink cut outs to manufacturer’s recommendationsStandard overhang is 35 mm from the carcass front, (not the door)Overhangs in excess of 300 mm should be supported and the worktop should be supported every 600 mm
Order reference
Wood installation and care set 564.13.998 must be ordered separately
Additional information attributes
Heat producing appliances that sit beneath the worktop, must have an aluminium foil membrane placed on the underside of worktop, directly above the applianceEnsure that pans used on gas hobs are of the correct sizeHob flanges must sit on aluminium thermal insulation around the cut-out, to avoid conducting excess heat and causing cracks in the worktopFlush mounted, recessed hobs (including induction hobs) are covered under warranty