• For use with internal or external doorsHeavy duty mechanismSuitable for 35-60 mm door thicknessLever handle lock for doors hung on the left or rightCode chamber requires that the lever is rotated 45° to re-set the lock for the next user code Versions:For use with existing mortice latch or lockFor use with existing mortice latch or lock with either a fixing hole 22 mm below the spindle follower or two horizontal holes either side of the spindle follower (38 mm centres)When using the front and back plates only, please test your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock cases have a highly sprung latch follower which can defeat the clutch on this lockWith tubular mortice latch included
• Lifetime warranty (terms and conditions apply)
• Equipped with
• Door operation insideLever operated
• Access control insideFree accessibility
• Door operation outsideLever operated
• Access control outsideCorrect code (standard)
• For door type
• Interior door, Exterior doors
• For number of doors
• 1-leaf doors

Suitable for

• Existing mortice latch or lock
• Features
• No power supply, no batteries and no wiring required, In order to reset the lock for the next code entry, the lever must be rotated by 45°, Latchbolt, reversible
• Outside backplate height
• 177 mm
• Outside backplate width
• 47 mm
• Outside lock depth
• 79 mm
• Inside backplate height
• 177 mm
• Inside backplate width
• 47 mm
• Inside lock depth
• 59 mm

Order reference

• Codelock fire door can be fitted to latch locks for 30 to 60 minute fire doors. Tested to accordance with BS EN 1634-1:2008
• Additional information attributes
• Other backset options are available - Information available on request